全国统一服务热线: 13567769200
产品中心
  • JXT1-50 5P

JXT1-50 5P

所属分类:T接端子JXT1

服务热线:13567769200

联系传真:

邮箱留言:32396157@qq.com

公司地址:乐清市柳市象阳工业区

打印当前页面

JXT1系列T接端子及电缆T接箱通常用于建筑、工业电气设备中作主电缆(干线)不能切断时的“T”型支线连接用。该产品由绝缘基座、接线框、防护罩三部分组成,接线框由导线夹、螺钉、螺母和支承框五种零件组成,导线夹与导线接触面呈包容形的犬牙交错结构,具有接触面大、压接可靠的特点,通过不同形状的导线夹的相互组合,可形成双层接线,下层接入主干线,上层接入分支线,形成干线不断的“T”型连接。
主要适合于建筑电气、低压电控配电、自动化成套装置等领域中作各类主干线不能切断的分支连接之用。同时也可作大截面电缆的线端连接之用。
JXT1 series T terminal and the cable T connection box are usually used in the "T" - shaped connection when the main cable (main line) can not be cut off in the construction and industrial electrical equipment. It is mainly suitable for building electrical, low-voltage electric control distribution, automatic complete set of equipment and other fields can not be cut off of the branches of the branch. At the same time, it can also be used as the wire end connection of large section cable.
实现电缆不切断时的干线分线,组态灵活
实现铜或铝导体的可靠连接,实现铜——铝过渡
所有电性能指标均符合IEC 国际标准,具导电性好、电阻损耗低、电压降小等优点,接触点压降仅为1.98mV,是国际标准的2/3
较强耐热性和抗冲击能力,可承受120A/mm2 的短路强度试验,绝缘基座采用不燃烧材料制作、耐老化性能优良
安装方便,节省施工工时,不用线鼻子(端头),实现裸导体连接,深受施工队伍欢迎
与插接式母线槽及分支电缆相比,节省50%-70%的工程费用
型号Specification JXT1-50/5P
主线截面Main line 16-50mm2
支线截面Branch line 10-35mm2
压线螺丝Screw M8
力矩Torque 18N·m
剥线长度Strip length 23mm
外观尺寸Dimension 长135宽60高78mm
用六角扳手拧开螺丝取出导体
Unscrew the screw with a six - corner wrench
take out the conductor
将主线与支线剥开适用长度
Peel off the length of the main line
and the branch line
将主线、导体、支线、螺栓、螺母按顺序放入支架,并拧紧螺母
The main line, the conductor, the branch, the bolt,
the nut put the bracket in order and tighten the nut
盖上防护罩并压紧完成安装
Cover with a protective cover and press tight
to complete installation
外壳采用全新尼龙材料,
搭配纯铜导体及金属固定螺杆
大电流接触稳定,可以用于五芯电缆快速T接
大量用于建筑楼盘供电分支,设计合理、质量可靠

宝杰

  • 关注微信

  • 进入阿里旺铺

13567769200

版权所有 @ 2018 浙江宝杰电力科技有限公司 | 全国免费服务热线:13567769200